Hobbico HobbyLite Filler Balsa, 8 oz.

#ad
Hobbico HCAR3401 #ad - Hobbico HobbyLite Filler Balsa, 8 oz. #ad - Easy clean-up with soap and water. Ready to use-no bubbles, no inconsistencies and no mixing mess. Hobbico hobbylite filler Balsa 8 oz Available in original or balsa colored formulas. No-shrink formula dries quickly and sands easily for smooth, solid surfaces.

More information about Hobbico HCAR3401 #ad


DELUXE MATERIALS DLMBD42 Eze Dope, Tissue Shrink, 250ml

#ad
Deluxe Materials #ad - Deluxe materials. Note: Packaging may vary.

More information about Deluxe Materials #ad


Similar products:



Top Flite MonoKote Flexible High-Gloss Polyester Covering Film Opaque Jet White

#ad
Hobbico TOPQ0204 #ad - Easily achieve smooth, glossy finishes for your RC model project. Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply. One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best. Over fifty vibrant colors available, in combination with six different finishes: Opaque, Neon, Pearl, Metallic, Transparent, and Flat.

Fuel-proof, waterproof and provides a high gloss finish. Fingerprint resistant and buffs to a high luster finish. Note: monokote requires high-heat application that is NOT suitable for use directly on foam models. And once applied, its special adhesive gets a grip that not even years of accumulated exhaust residue can break.

Top Flite MonoKote Flexible High-Gloss Polyester Covering Film Opaque Jet White #ad - For low-heat applications, try Top Flite EconoKote, available in 6 foot rolls of 9 different colors. Monokote covering is availble in over fifty color combinations among the following finishes:Opaque: traditional and typically most popularTransparent: stained-glass, flat finishFeatures:Super strong coveringTensile strength of 25, lustrous huesFlat: non-reflective, see-through colorsNeon: "sunglasses required" brightsMetallic: glittering metal-flakePearl: subtle, 000 psi pounds per square inchLightweight - only 0.

2 ounces per square footdry adhesive activates when heat is applied ranges listed belowshrinks to a drum-tight finish as it coolshigh gloss finishfuel-proof and waterproofstronger and lighter than traditional silk and dope coveringsMay be cleaned with common glass cleaner, Formula 409 cleaner or MonoKote Cleaner Polish TOPQ2500Not suitable for use directly on foam use EconoKote insteadIncludes: One 6' x 26" roll of covering Opaque Jet WhiteRequires:Top Flite Sealing Iron TOPR2100Top Flite Heat Gun TOPR2000Top Flite Iron Sock TOPR2175Temperature Ranges:Attaching to Wood activating the adhesive: 215 - 240 degrees FahrenheitPartial Shrinkage: 230 - 270 degrees FahrenheitMaximum Shrinkage: 270 - 350 degrees FahrenheitProduct Specifications:Width: 26 inches 66.

04 centimetersLength: 6 feet 1. 83 metersoptional accessories:MonoKote Trim Sheets: an easy way to add more colors and individuality to your project.

More information about Hobbico TOPQ0204 #ad


Similar products:



Fast Drying Wood Cement by Testors

#ad
TESTORS SG_B0006NDZHQ_US #ad - Easily achieve smooth, glossy finishes for your RC model project. Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply. One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best. Over fifty vibrant colors available, Neon, Pearl, in combination with six different finishes: Opaque, Metallic, Transparent, and Flat.

Fast Drying Wood Cement by Testors #ad - Fuel-proof, waterproof and provides a high gloss finish. Testors 3503 cement for Wood Models Extra Fast Drying. Testors iconic tube of cement is the #1 selling Testors item in the hobby category. They offer quality and convenience at a low price. This is a 5/8 oz tube of Extra Fast Set Testors Wood Model Cement.

Both the standard and the non-toxic versions of Testors Cement for plastic are staples for the hobbyist. Testors cements have been used by hobbyists and craftsmen for over 75 years. The full range of testors cements and glue are exceptionally strong, fast-drying and easy to use.

More information about TESTORS SG_B0006NDZHQ_US #ad


Similar products:



Great Planes 220 Grit Easy-Touch Sandpaper

#ad
Hobbico Inc GPMR6185 #ad - Includes: one 12' roll of 220-grit self-adhesive sandpaper. Sized to fit easy-touch Bar Sanders perfectly, simply trim off the length needed. Adhesive backing makes it a cinch to apply, just press it on. This is the sandpaper designed for the Great Planes Easy-Touch sander bar. Easily achieve smooth, glossy finishes for your RC model project.

Great Planes 220 Grit Easy-Touch Sandpaper #ad - Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply. One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best. Over fifty vibrant colors available, in combination with six different finishes: Opaque, Pearl, Metallic, Neon, Transparent, and Flat.

Fuel-proof, waterproof and provides a high gloss finish. Testors 3503 cement for Wood Models Extra Fast Drying. Includes: one 12' roll of 220-grit self-adhesive sandpaper.

More information about Hobbico Inc GPMR6185 #ad


Similar products:



HANGAR 9 Sealing Iron Sock, HAN141

#ad
Hangar 9 #ad - Adhesive backing makes it a cinch to apply, just press it on. Includes: one 12' roll of 220-grit self-adhesive sandpaper. Hangar 9 sealing iron sock, han141 Easily achieve smooth, glossy finishes for your RC model project. Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply.

One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best. Over fifty vibrant colors available, Metallic, Transparent, Neon, in combination with six different finishes: Opaque, Pearl, and Flat. Fuel-proof, waterproof and provides a high gloss finish. Testors 3503 cement for Wood Models Extra Fast Drying.

HANGAR 9 Sealing Iron Sock, HAN141 #ad - Sized to fit easy-touch Bar Sanders perfectly, simply trim off the length needed. Hangar 9 sealing Iron Sock, HAN141.

More information about Hangar 9 #ad


Similar products:



DELUXE MATERIALS Tissue Paste, 50 ml, DLMAD60

#ad
Deluxe Materials #ad - Hangar 9 sealing Iron Sock, HAN141. Deluxe materials tissue Paste, 50 ml, DLMAD60 . Includes: one 12' roll of 220-grit self-adhesive sandpaper. Adhesive backing makes it a cinch to apply, just press it on. Deluxe materials tissue paste, 50 ml, DLMAD60 Easily achieve smooth, glossy finishes for your RC model project.

DELUXE MATERIALS Tissue Paste, 50 ml, DLMAD60 #ad - Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply. One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best. Over fifty vibrant colors available, Metallic, Pearl, Transparent, Neon, in combination with six different finishes: Opaque, and Flat.

Fuel-proof, waterproof and provides a high gloss finish. Testors 3503 cement for Wood Models Extra Fast Drying. Sized to fit easy-touch Bar Sanders perfectly, simply trim off the length needed.

More information about Deluxe Materials #ad


Similar products:



Midwest Glue Balsa & Basswood Glue 4 oz.

#ad
Midwest SG_B001LX12BQ_US #ad - Deluxe materials tissue Paste, 50 ml, DLMAD60 Includes: one 12' roll of 220-grit self-adhesive sandpaper. Super glue ca thick Flex formula is ideal for basswood. Super glue accelerator quick-set spray to speeds up drying time when used with CA glues. Sized to fit easy-touch Bar Sanders perfectly, simply trim off the length needed.

Super glue ca thin formula is ideal for Balsa wood. Easily achieve smooth, glossy finishes for your RC model project. Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply. One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best.

Midwest Glue Balsa & Basswood Glue 4 oz. #ad - Over fifty vibrant colors available, Metallic, Transparent, Pearl, Neon, in combination with six different finishes: Opaque, and Flat. Fuel-proof, waterproof and provides a high gloss finish. Testors 3503 cement for Wood Models Extra Fast Drying. Midwest produces an assortment of glues that are ideal for model making and use with modeling woods.

The midwest balsa & basswood glue is a modeling glue that is non-toxic and dries clear and flexible. Adhesive backing makes it a cinch to apply, just press it on. Hangar 9 sealing Iron Sock, HAN141.

More information about Midwest SG_B001LX12BQ_US #ad


Similar products:



Du-Bro 216 Kwik-Hinge Slotter

#ad
Du-Bro 216 #ad - Easily achieve smooth, glossy finishes for your RC model project. Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply. One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best. Over fifty vibrant colors available, Pearl, in combination with six different finishes: Opaque, Transparent, Metallic, Neon, and Flat.

Fuel-proof, waterproof and provides a high gloss finish. Testors 3503 cement for Wood Models Extra Fast Drying. Adhesive backing makes it a cinch to apply, just press it on. Innovation and reliability has been synonymous with DU-BRO for all these years and coupling that with great customer service and a knowledgeable, helpful staff, has made DU-BRO a staple line in all the industries they have taken on.

Du-Bro 216 Kwik-Hinge Slotter #ad - Hangar 9 sealing Iron Sock, HAN141. Since 1959, the broberg family has owned and operated DU-BRO Products, Inc. During that time, offering more than 1, the company has grown from a single product, to 4 companies in three industries, 200 items. Deluxe materials tissue Paste, 50 ml, DLMAD60 Sized to fit easy-touch Bar Sanders perfectly, simply trim off the length needed.

. Centers and guides for perfectly aligned slots for any hinge.

More information about Du-Bro 216 #ad


Similar products:



Model Shipways Set of 6 Hull Clamps for Bulkheads 3/16" or Thicker MX104

#ad
Model Expo #ad - Model Shipways No. Laser cut plywood planking clamps eliminate unsightly holes in you blukheads, and you won't waste time screwing in and removing threaded planking clamps. Mx104 easily achieve smooth, glossy finishes for your RC model project. Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply.

One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best. Over fifty vibrant colors available, Pearl, Transparent, in combination with six different finishes: Opaque, Metallic, Neon, and Flat. Fuel-proof, waterproof and provides a high gloss finish. Testors 3503 cement for Wood Models Extra Fast Drying.

Model Shipways Set of 6 Hull Clamps for Bulkheads 3/16" or Thicker MX104 #ad - Set of 6. Centers and guides for perfectly aligned slots for any hinge. Adhesive backing makes it a cinch to apply, just press it on. Set of 6 hull clamps for bulkheads 3/16" or thicker by Model ShipwaysON SALE 42% OFF MSRP!Regular price $11. 99! model expo has been serving hobby enthusiasts with precision Models since 1976, and is a hobby tools manufacturer, distributor, and reseller.

They also hold you planks firmly in place while you glue, drill, measure and taper. Assembly required.

More information about Model Expo #ad


Similar products:



Testor Corp. Testors 3505X WOOD CEMENT FAST 5/8 OZ

#ad
Testors 75611350509 #ad - Centers and guides for perfectly aligned slots for any hinge. Laser cut plywood planking clamps eliminate unsightly holes in you blukheads, and you won't waste time screwing in and removing threaded planking clamps. Hold you planks firmly in place while you glue, drill, measure and taper. Cement adhesives Fast Dry Wood Cement.

Adhesive backing makes it a cinch to apply, just press it on. Quick Dry. Easy To Use. Includes: one 12' roll of 220-grit self-adhesive sandpaper. Contains: 5/8oz. Set of 6 hull clamps for Bulkheads 3/16" or thicker. Sized to fit easy-touch Bar Sanders perfectly, simply trim off the length needed. Hangar 9 sealing Iron Sock, HAN141.

Testor Corp. Testors 3505X WOOD CEMENT FAST 5/8 OZ #ad - Deluxe materials tissue Paste, 50 ml, DLMAD60 Diecast metalbody Easily achieve smooth, glossy finishes for your RC model project. Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply. One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best.

Over fifty vibrant colors available, Neon, in combination with six different finishes: Opaque, Metallic, Pearl, Transparent, and Flat.

More information about Testors 75611350509 #ad


Similar products: