Top 10 Flight Controller F4 – Toys & Games

As an Amazon Associate I earn from qualifying purchases.

1. WonVon

#ad

Flight Controller Board,F4 V3 ProBeataflight F4 V3 Flight Controller Set Built-in OSD Barometer BEC TF Slot for Wizard X220S Martian II 220mm FPV Racing Drone

#ad
WonVon #ad - Mpu6000 6 axis spi gyro & accelerometer, SBUS/PPM AND Spketrum dsm-x Ports. Stm32 f405 mcu, dshot support. Secure digital memory card blackbox, BaroBMP280 Drag and drop oSD configured via Betaflight Configurator. Smartaudio v2 support – tune your PID’s and configure the omnibus F C from your Transmitter.
BrandWonVon #ad
ManufacturerWonVon #ad
Part NumberQMYYM0101

2. Xiangtat

#ad

Xiangtat XRotor Micro Combo, F4 G3 Flight Controller + 60A 4-in-1 ESC Combo for RC FPV Racing Drone Quadcopter

#ad
Xiangtat #ad - Betaflight/Cleanflight Firmware Ready. Onboard osd microchip allows users to easily adjust various OSD parameters via the Betaflight/Cleanflight software.

Onboard osd microchip allows users to easily adjust various OSD parameters via the Betaflight/Cleanflight software. Proshot1000, dshot 150/300/600/1200, oneshot42, oneshot125, multishot modes supported. The stm32f405 mcu which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency. Tf-card insertion supported. Tf-card insertion supported. Super-high running frequency. Besides the latest proshot, oneshot42 mode, oneshot125 mode, the FC also supports the regular PWM mode, Dshot 150/300/600/1200 mode, and Multishot mode.
BrandXiangtat #ad
ManufacturerXiangtat #ad
Part Number30902063

3. iFlight

#ad

IFlight SucceX-D F4 Flight Controller 20A ESC AIO Whoop Board MPU6000 for Tiny Whoop Cinewhoop FPV Racing Drone Quadcopter Work with FPV Air Unit

#ad
iFlight #ad - 4. Input support: 2-4s, BEC output: 5V 2A. 5. If you like to make this board work with other radio transmitter, please check our wiring diagram carefully. 1. Succex-d f4 aio board is the superb board layout allowing for easy and clean builds. 2. Plug and play for dji HD FPV system, no need to solder tiny wires. 3. Mounting pattern: 25. 5*25. 5mm/φ3mm, with micro usb connector.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

4. BETAFPV

#ad

BETAFPV F4 AIO 1-2S Brushless Flight Controller No Receiver 5A ESC Integrated 25mW VTX with BT2.0 Connector for 1-2S FPV Brushless Whoop Drone Like Meteor75 Beta85 Pro 2

#ad
BETAFPV #ad - F4 aio 1-2s fc designed with a pluggable pin to connector BETAFPV SPI Frsky receiver. Integrated 25mw vtxbetafpv newest f4 aio 1-2s brushless flight controller integrated 25mW VTX, no need to solder an external VTX, more convenient for installation and it saves more weight for 1-2S whoop drone to get a faster flight experience.

Support receiverbetafpv f4 aio 1-2s brushless flight controller built without receiver, dsmx, pilots need to solder the external receiver like Frsky XM/XM+, TBS etc. Plug&play connector for cameracome with a 3-pin connector for connecting C01 micro camera and 6-pin connector for Nano HD camera directly, no soldering needed, it is convenient for installation, just plug and play. Compatible dronethis newest f4 aio 1s brushless flight controller comes with F411 chip, it is specially designed for 1-2S brushless whoop drone like Meteor75, Beta85 Pro 2.
BrandBETAFPV #ad
ManufacturerBETAFPV #ad
Part Number00313785_4

5. TCMMRC

#ad

TCMMRC 2-5s Mini Flight Tower System F4 Flight Controller + 4 in 1 40A ESC BLHeli_S for FPV Racing Drone Quadcopter

#ad
TCMMRC #ad - Advanced 〗: mini f4 flight control has been optimized overall. Practical 〗: 2-5s blheli_s esc supports dshot dshot150/300/600 It has optimized internal circuitry, which makes your build easy to assemble and it has a cleaner look.

It is mini new compact and concentrated into a two-layer tower structure. Unique design 〗: 2-5s mini flight tower is specially designed for mini FPV racers. The built-in osd chip helps to monitor the status of the flight data at any time. It supports 2-5S Lipo Input. Latest features 〗: the mini fc and esc neatly stack together and highly integrated with all the latest features. Easy to use 〗: the mini fc and esc are plug-and-Play. There is no need to solder tiny wires. Micro f4 flight control has been optimized overall.
BrandTCMMRC #ad
ManufacturerGenius wood #ad
Part NumberGenius wood

6. iFlight

#ad

Current Sensor, Barometer, 8MB Black Box, for 3-6s FPV Racing Drone Quadcopter, Built-in OSD, iFlight SucceX-E F4 V2.1 Flight Controller 30.5X 30.5mm Mounting F4 FC

#ad
iFlight #ad - Built with bat, start indicator light, +5v, 3.3v, it will indicate the current working status. Succex-e f4 v2. 1 fc support vista HD VTX plug directly. This f4 v2. 1 support all receiver such as frsky receiver, tbs receiverdirectly plug to it, no need to solder. Succex-e f4 v2. 1 fc support analog vtx and analog camera directly plug, no need solder. This f4 flight controller built with LC filter, this LC filter reduces DC-DC switcher supply ripple and helps clean noisy power from a battery.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0

7. TCMMRC

#ad

TCMMRC FC F4 Flight Controller OSD 2-5S DSHOT600 for RC Drone FPV Racing 30.5x30.5mm

#ad
TCMMRC #ad - 4 in 1 40a blheli_s esc;continuous current: 40a; peak current: 50a 10s;bec: 5v 2a bec;input voltage: 2-5s;main control chip: 48mhz EFM8BB2;Firmware upgrade: Supports Dshot600/BLHeli_S/Oneshot125;MOS: 5*6.

F4 flight controller;mcu: stm32f405; gyro: icm20602 6-axis;bec: 10v 1A;Support Receiver:PPM, Ibus, Sbus, Dsmx. F4-40a stack is convenient for beginners. Customer first-if the esc flight control is due to quality problems, please contact us in time and we will solve it for you. Mounting hole:m3*305*305mm;suitable for 4-7 inch Drone Frame. Easy to solder, the f4 flight controller has multiple ports, No soldering, just plug in the port line.
BrandTCMMRC #ad
ManufacturerTCMMRC #ad
Weight0.05 Pounds
Part Number361

8. Makerfire

#ad

Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

#ad
Makerfire #ad - Matek flight controller f405-wing : upgraded Flight Controller, it is designed specially for fixed wing. With 4x bec current sensor on board. Mcu: 168mhz stm32f405, imu: mpu6000 accelerometer/gyro spi, baro: bmp280 i2c, osd: inav osd w/ at7456E chip, Blackbox: MicroSD card slot SD/SDHC. Current senor: 104a, 3. 3v adc, scale 317, mounting: 305 x 305mm, Φ4mm with Grommets Φ3mm. 4x bec on board:2x motors, 7x servos outputs, 3x leds for FC STATUS Blue, 2x I2C, Red and 3.3v indicatorRed.
BrandMakerfire #ad
ManufacturerMakerfire #ad
Height0.51 Inches
Length2.2 Inches
Weight0.06 Pounds
Width1.42 Inches
Part Number60L3249W15B0T

9. VGEBY

#ad

F4 V3 PRO Flight Controller Built‑in OSD with ESC Replacement Part for RC Drone Flight ControllerBlack

#ad
VGEBY #ad - Durable to use-easy and convenient for installation, reliable and durable to use. More precise-following in the footsteps of the Omnibus F3 Pro, the Omnibus F4 Pro V3 may be the standard by which all other flight controllers are measured. Wonderful replacement-Wonderful replacement for the old or broken one, directly fitment. Boasting an f4 processor-boasting an F4 processor, on‑board Betaflight OSD, 5v3a sbec, video filter. Connectyour smartaudio capable vtX-With leaps and bounds in programming, it is now possible to connect your Smartaudio capable VTX.
BrandVGEBY #ad
ManufacturerVGEBY #ad
Height0 Inches
Length0 Inches
Weight0.03 Pounds
Width0 Inches
Part NumberVGEBY67nadzgqp0-11

10. iFlight

#ad

IFlight SucceX Micro F4 V2.1 Flight Controller Stack 2-4S F4 FC + 4 in 1 15A ESC BLHeli_S + 5.8G Pit/25/100/200mW Transmitter VTX for FPV Micro Racing Drone Quadcopter

#ad
iFlight #ad - 5. Micro 5. 8g pit/25/100/200mw switchable fpv transmitter vtx with irc tramp function helps setting frequency point, power and FC parameter directly, use Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.

4. 15a 4 in 1 micro esc dshot600 blheli_s 2-4s esc support dshot, Oneshot, etc. The built-in osd chip helps to monitor the status of the flight data any time, integrated programmable RGB LED port. 2. The micro fc, highly integrated with all the latest features, eSC, optimized internal circuitry, and vtx neatly stack together, with pinned interconnects that make your build easy to assemble and cleaner looking.

Succex 16x16mm micro f4 flight tower is specially designed for Micro FPV race quad micro new compact and concentrated into a three-layer tower structure. 1. 3. Micro f4 flight control has been optimized overall. The soldering pad is semi-extended, Multishot, save more room but solid.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0